Serving the Greenville area  ·  (252) 351-2955  ·  Open Mon-Sun 7am-7pm
📞 (252) 351-2955 Free Quote

Metal Roofing in Winterville, NC (28590) · Local Professionals

Greenville Metal Roofing · Fast response in Winterville and the Greenville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+170Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Winterville is where the subdivisions meet the farm fields, and the roofs show it. From the brick ranches off Winterville Parkway to the newer vinyl-sided homes in Red Banks and the metal outbuildings on the farm edges, this is a town where one roof style does not fit all.

Homeowners in 28590 call Greenville Metal Roofing because we understand that mix. We have put standing seam on a 1990s subdivision house near the Winterville Recreation Center and repaired corrugated panels on a tobacco barn just outside town. When the summer storms roll through and the pines drop limbs, we are the crew that knows how to get your roof watertight again.

Metal Roofing in Winterville (28590)

Winterville sits on flat, sandy loam soil that drains fast but shifts under heavy rain. Most lots are generous, but the older homes near the original town center have tight side yards and mature trees that drop debris year-round. The newer subdivisions off Forlines Road and Thomas Langston Road have steeper pitches and HOA rules that dictate panel profiles and colors. We have worked with both. On the farm side, we see a lot of corrugated and ribbed panel roofs on barns and sheds that need re-fastening after 20 or 30 years of sun and wind. The heat and humidity here also mean algae streaks on shingles and occasional moss on north-facing slopes, which is one reason metal roofs are gaining ground. We know how to handle the flashing details around chimneys and skylights that are common on the 1970s ranches, and we understand the wind uplift requirements for this part of Pitt County.

Our team has been serving Winterville and the greater Greenville area for years. We have worked in Ironwood, Red Banks, and the neighborhoods around Winterville Elementary, and we know the permit office at the Pitt County building department and what they expect for a re-roof. Whether it is a metal shingle roof on a Craftsman bungalow or a standing seam roof on a new construction home, we bring the same attention to detail.

Our services in Winterville

How a Job Works in Winterville

Step 1: You call us at (252) 351-2955 or fill out a form. We schedule a free on-site assessment at your Winterville property, usually within a couple of days. We walk the roof, check the decking, flashing, and fasteners, and talk with you about what you want. You get a written estimate with clear pricing and options.

Step 2: Once you approve, we pull the permit from the local building department and schedule the work. For homes in HOAs, we help you get the design approval before we order materials. On tight lots, we plan where to stage materials and the dumpster so we do not block your neighbors. We protect your landscaping and keep the work area safe. Most residential roofs take two to five days depending on size and complexity.

Step 3: We clean up every day and do a final walkthrough with you. We use a magnet to pick up screws and nails, and we make sure your gutters and downspouts are clear. You get a warranty on labor and materials, and we do not leave until you are satisfied.

Pricing in Winterville depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. For a typical 1,500 to 2,000 square foot ranch, metal roof installation starts around $8 per square foot, standing seam around $10, and metal shingle roofing around $9. If you are replacing an existing roof, add $9 per square foot for replacement, or $7 per square foot for a retrofit over shingles (subject to code limits on layers). Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. We also offer free inspections and estimates for storm damage. Call (252) 351-2955 to get a precise quote for your Winterville home.

My house is in one of the older neighborhoods near the Winterville town center, and the roof has a low pitch. Can you install metal over the existing shingles?
Yes, in many cases we can do a metal roof over shingles if the existing roof has only one layer and the decking is sound. Low-pitch roofs need special underlayment and panel profiles to prevent leaks. We will inspect your roof and tell you if a retrofit is allowed under current code. If not, we will explain the full replacement option.
A storm just knocked a limb onto my roof in Winterville. How fast can you get here for an emergency repair?
We prioritize storm damage calls in the Winterville area. In most cases we can get out within 24 to 48 hours to tarp or repair the damage. Call us at (252) 351-2955 and we will schedule a free inspection and give you a written estimate for the repair.
What is the typical cost for a metal roof on a 1,800 square foot house in Winterville?
For a house that size, most metal roof installations run between $14,000 and $20,000 depending on the material and complexity. Standing seam is at the higher end, while corrugated panel is more economical. We provide a detailed estimate after a free on-site assessment.
Do I need a permit to replace my roof in Winterville, and does the historic district affect anything?
Yes, a permit is generally required for a full roof replacement in Winterville. The rules vary, so we always check with the local building department before starting. If your home is in a historic district, there may be design review for panel style and color. We handle the permit application and any required approvals for you.
My HOA requires a specific color for metal roofs. Can you help with the approval process?
Absolutely. We work with HOAs in Winterville regularly. We can provide color samples and specification sheets for the architectural review, and we will coordinate with your HOA board to make sure the installation meets their guidelines. We will not order materials until you have written approval.
Are you fully insured for roofing work in Winterville?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Winterville's climate?
Metal roofs are low maintenance, but in our humid summers and storm season, we recommend an annual inspection to check fasteners, seals, and flashing. We also suggest keeping gutters clear of pine needles and debris. If you see any loose panels or signs of a leak, call us right away. A little preventive care goes a long way.
Why choose us?

Trusted professionals in Greenville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greenville

All your work handled by qualified professionals in Greenville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

170+ Verified Client Reviews in Greenville

⭐⭐⭐⭐⭐ 4.9/5 · 170 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greenville · Response within 24h · No commitment · ☎ (252) 351-2955

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greenville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm