Licensed & Insured, in Greenville and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Greenville
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (252) 351-2955 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Greenville and surrounding areas · On-site visits included · Free estimate within 24h
Greenville Metal Roofing is a team of local certified professionals based in Greenville. We respond quickly in Greenville and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (252) 351-2955⭐⭐⭐⭐⭐ 4.9/5 · 170 verified Google reviews
“We had Greenville Metal Roofing out to put a new metal roof on our hay barn and I couldn't be happier with how it turned out. The crew of four knocked out the whole 60x40 building in two days and cleaned up every last screw off the ground. No more leaks on the equipment.”
Commercial & Agricultural Metal Roofing
“The copper roof over our front porch had been patching along for years, and these guys finally did it right. They replaced the failing copper panels and redid the flashing around the columns. It looks better than the day the house was built and the price was fair.”
Copper & Specialty Metal Roofing
“Our old farm building had shingles failing everywhere and we were worried about the cost of a full tear-off. Greenville Metal Roofing laid standing seam right over the existing roof and saved us thousands. Two months in and not a single drip.”
Metal Roof Over Shingles (Retrofit)
“Got three quotes for a standing seam roof on our house and these folks were the only ones who actually got up on the roof before quoting. Took them about three days for the whole house and the seams look laser straight. Neighbors have already asked for their number.”
Standing Seam Metal Roofing
“Had a leak around the chimney that two other roofers couldn't find. The guy from Greenville Metal Roofing traced it to bad flashing in about ten minutes and had it fixed the same afternoon. Only gripe is they were a week out before they could get to me, but worth the wait.”
Flashing, Chimney & Skylight Repair
“Brand new ribbed panel roof on our house and it's night and day from the old asphalt. The crew was in and out in two days, hauled off every bit of the old material, and even blew the driveway clean. Genuinely impressed with how tidy they left everything.”
Metal Roof Installation
“We went with stone-coated steel to keep the look of shingles but get the metal durability, and Greenville Metal Roofing nailed it. They walked us through samples without any pressure and the finished roof looks fantastic from the street. One small delay waiting on a color shipment, but they kept us posted the whole time.”
Stone-Coated Steel Roofing
“Our brick house had a rusty old metal roof that was past saving, so we had it fully replaced with new panels and fresh flashing. The difference is honestly striking, it looks like a different house. Fast, professional, and the price came in right where they quoted.”
Metal Roof ReplacementReal photos of our work in Greenville · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener ribbed panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment and basic flashing on a straightforward single-story roof. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and raised seams; price climbs with pitch, valleys and chimney count. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Textured panels for HOA and historic homes; complexity and panel style drive the final rate. |
| Full tear-off with sheathing repair | On estimate | Soft decking from years of pine debris and humidity needs an on-site look before pricing. |
| Travel | Included | in Greenville and surrounding Pitt County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (252) 351-2955, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam install, simple gable | Starting at $10/sq ft | Includes tear-off, underlayment, panels, and standard trim on a straightforward roof. |
| Standing seam install, complex roof | Starting at $14/sq ft | Covers dormers, valleys, and chimneys that add flashing and labor time. |
| Retrofit over existing shingles | On estimate | Depends on shingle condition, deck soundness, and local code limits on layers. |
| Panel color or profile upgrade | On estimate | Premium finishes and custom profiles priced per panel and color selection. |
| Travel | Included | In Greenville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (252) 351-2955, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener replacement | Starting at $9/sq ft | Tear-off, deck inspection, underlayment, and corrugated or ribbed panels on simple gable roofs |
| Standing seam replacement | Starting at $13/sq ft | Concealed fasteners and raised seams; price rises with roof pitch, length of runs, and panel gauge |
| Metal shingle or stone-coated steel | Starting at $15/sq ft | Stamped or granule-coated panels; cost moves with profile complexity and historic or HOA color requirements |
| Complex or large-scale job | On estimate | Hip roofs, multiple valleys, chimneys, and soft decking need an on-site look before pricing |
| Travel | Included | In Greenville and surrounding Pitt County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (252) 351-2955, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one layer of shingles | Starting at $7/sq ft | Includes slip sheet, standard panel, and trim on a sound single-layer roof. |
| Standing seam retrofit | Starting at $9/sq ft | Concealed fasteners and raised seams, priced higher than exposed-fastener panels. |
| Metal shingle or stone-coated retrofit | Starting at $10/sq ft | Textured or interlocking profiles that mimic the original roof look. |
| Deck repair or re-flashing | On estimate | Priced after inspection, since soft decking and bad flashing vary house to house. |
| Travel | Included | In Greenville and surrounding Pitt County areas, with no separate call-out fee. |
| Estimate | Free | Response within 24 hours at (252) 351-2955, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, sealant, small flashing) | Starting at $450 | Covers trip, diagnosis, materials, and water test on small fixes |
| Single panel replacement | Starting at $750 | Includes matching panel, sealant, and re-securing the field around it |
| Flashing or penetration rebuild | Starting at $650 | Chimney, skylight, or pipe boot rebuild with new metal flashing |
| Storm damage repair | On estimate | Scope depends on number of panels hit and insurance documentation needed |
| Travel | Included | In Greenville and surrounding Pitt County areas, no separate call-out fee |
| Estimate | Free | Response within 24h at (252) 351-2955, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single fastener or pipe boot repair | Starting at $450 | Includes roof walk, water test, fastener or boot replacement and verification. |
| Flashing and transition repair | Starting at $650 | Chimney, skylight or porch tie-in flashing rebuilt; access and height move the price. |
| Seam repair on standing seam roof | Starting at $850 | Seam re-seat or replacement; roof pitch and panel length are the main cost drivers. |
| Panel section replacement | On estimate | Needs an on-site look to match profile, gauge and color before quoting. |
| Emergency tarping after storm | Starting at $350 | Temporary watertight cover; urgency and roof access affect the final figure. |
| Travel | Included | In Greenville and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Washer-only replacement | Starting at $750 | Covers pulling and resetting fasteners with new UV-resistant washers on a small residential roof. |
| Oversized screw re-fasten | Starting at $1,150 | Steps up one gauge on worn holes across a typical single-story exposed-fastener roof. |
| Full field re-fastening | On estimate | Priced by fastener count and roof size, so we walk the roof before quoting. |
| Steep or difficult access | On estimate | Steep pitch, tight side yards or staging needs add labor and safety time to the job. |
| Travel | Included | In Greenville and surrounding Pitt County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (252) 351-2955, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, basic carport or shed | Starting at $5.50/sq ft | Includes panels, screws, closures and basic trim on a simple open structure; gauge and pitch move the price. |
| R-panel roof on a shop or garage | Starting at $6.75/sq ft | Includes ribbed panels, fasteners and ridge trim; wider spans and framing repair push the number up. |
| Panel roof over existing shingles | Starting at $7.25/sq ft | Includes furring strips and panels where code allows the existing layers; layer count and deck condition decide feasibility. |
| Tear-off and full replacement | Starting at $8.50/sq ft | Includes removal and disposal of old roofing plus new panels; access and dumpster distance affect the total. |
| Complex or large agricultural building | On estimate | Long runs, skylights, multiple penetrations and framing repairs need an on-site look before any number is given. |
| Travel | Included | In Greenville and surrounding Pitt County areas, with no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, simple hip or gable | Starting at $9/sq ft | Includes tear-off of one layer, synthetic underlayment, standard flashing and metal shingle panels on a straightforward roof. |
| Metal shingle roof, cut-up roof with valleys and penetrations | Starting at $12/sq ft | Adds valley metal, chimney and skylight flashing, and extra layout time for multiple roof planes and dormers. |
| Metal shingle over existing shingles | Starting at $8/sq ft | Installed over one sound existing layer where local code allows, with new underlayment and trim, no tear-off. |
| Historic district or HOA design review job | On estimate | Profile and color approval, sample submittals and possible custom trim change the scope and timeline. |
| Travel | Included | In Greenville and surrounding Pitt County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (252) 351-2955, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof replacement (tear-off) | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and standard flashing; steeper pitch or extra penetrations raise the rate. |
| Stone-coated steel over existing shingles (retrofit) | Starting at $7.50/sq ft | Includes prep, underlayment, and panels where code allows; existing layer count and deck condition affect the price. |
| Stone-coated steel repair and re-fastening | Starting at $450 | Covers damaged panel replacement and fastener work; access and the number of affected panels drive the total. |
| Complex or large-scale job | On estimate | Steep roofs, multiple chimneys, dormers, and historic profiles need an on-site look before we quote a number. |
| Travel | Included | In Greenville and surrounding Pitt County towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (252) 351-2955, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window, dormer) | Starting at $20/sq ft | Includes custom-fabricated copper panels and flashing; complexity of porch framing moves the price. |
| Zinc or aluminum accent panels | Starting at $18/sq ft | Lightweight panels for low-slope sections; access and panel count affect the final rate. |
| Full architectural copper roof | On estimate | Square footage, roofline complexity and historic design review require an on-site measurement first. |
| Custom flashing and trim fabrication | On estimate | Valleys, chimney caps and half-round gutters priced by linear foot and profile complexity. |
| Travel | Included | In Greenville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (252) 351-2955, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, single-story roof | Starting at $2.50/sq ft | Includes wash, rust treatment, primer, and two coats on an accessible single-story panel roof. |
| Coating with fastener replacement | Starting at $3.25/sq ft | Adds replacement of loose or rusted screws and resealing of penetrations before coating. |
| Heavy rust restoration | On estimate | Panels with active rust across laps and edges need a hands-on assessment before pricing. |
| Two-story or steep-pitch roof | On estimate | Access, lift rental, and fall protection change the labor math on taller or steeper roofs. |
| Travel | Included | In Greenville and surrounding Pitt County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (252) 351-2955, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single skylight boot replacement | Starting at $600 | Includes new boot, sealant and water test on one skylight; price rises with roof pitch and access. |
| Chimney counterflashing repair | Starting at $750 | Covers new counterflashing and reglet cut on one chimney; masonry height and condition move the price. |
| Full chimney pan and counterflashing rebuild | Starting at $1,200 | Includes new pan, counterflashing and deck check; taller chimneys and steep roofs push the number up. |
| Valley or step flashing repair | Starting at $900 | Covers opening the valley or sidewall, new metal and re-lapping; debris-clogged valleys add labor. |
| Complex or large-scale job | On estimate | Multiple leak points, historic-district roofs or rotted decking need an on-site look before we quote. |
| Estimate | Free | Response within 24 hours at (252) 351-2955, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted guard run over one door or walkway | Starting at $1,200 | Covers a short run of seam-clamp or pad guards above the main risk spot, with hardware and sealant included. |
| Full eave and valley protection | Starting at $2,400 | Adds guards along the full eave and valley runs, priced by roof length and panel profile. |
| Heated cable at eave and valley | Starting at $1,800 | Self-regulating heat cable plus clips and control, priced by linear feet and access difficulty. |
| Steep or two-story roof access | On estimate | Pitch, staging and lift needs are checked on site before we quote a steep or high roof. |
| Travel | Included | In Greenville and surrounding Pitt County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (252) 351-2955, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic walk with dated photos, plus a written repair-or-replace recommendation |
| Screw replacement and re-fastening | Starting at $350 | Pulls sheared screws, upsizes fasteners with EPDM washers, and re-torques to spec |
| Flashing and penetration repair | Starting at $450 | Rebuilds torn chimney, skylight, or vent flashing with new metal and counter-flashing |
| Standing seam panel replacement | On estimate | Panel count, clip condition, and roof pitch determine the scope before pricing |
| Insurance documentation package | Included | Photo set, measurements, and adjuster meeting included with every storm repair |
| Estimate | Free | Response within 24 hours at (252) 351-2955, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full walk-over with photo report; roof size and pitch move the final figure. |
| Pre-purchase or insurance inspection | Starting at $250 | Written condition report with remaining service life; documentation depth affects price. |
| Large or complex roof inspection | On estimate | Multiple levels, steep pitch and historic detail need an on-site look first. |
| Travel | Included | in Greenville and surrounding Pitt County areas, no separate call-out fee. |
| Estimate | Free | Response within 24 hours at (252) 351-2955, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes on-site forming, hidden hangers, and basic downspouts; height and pitch move the price. |
| Oversized 6-inch with leaf guards | Starting at $14/linear ft | Wider trough and screened hood for pine and sweetgum cover; tree density drives the add-on. |
| Half-round steel or aluminum | Starting at $16/linear ft | Deeper historic profile with bracket hangers; trim condition and access affect the final rate. |
| Fascia and soffit repair before hanging | On estimate | Soft or rotted wood must be replaced before hangers go up, so we look before quoting. |
| Travel | Included | In Greenville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (252) 351-2955, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Repair or re-fastening | Free estimate | Covers leak diagnosis, screw replacement, and flashing repair on existing metal panels. |
| Exposed-fastener panel roof | Starting at $4.50 per sq ft | Corrugated or ribbed panels installed, priced by roof size, pitch, and access. |
| Standing seam commercial roof | Starting at $8.50 per sq ft | Concealed-fastener panels with trim and flashing, priced by height and complexity. |
| Large agricultural building | On estimate | Packhouses and barns need an on-site look at framing, purlins, and access. |
| Travel | Included | in Greenville and surrounding Pitt County areas, no separate call-out fee. |
| Estimate | Free | Response within 24h at (252) 351-2955, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Greenville need someone who understands how roofs actually perform in eastern North Carolina's hot, humid climate and flat Tar River floodplain. Greenville Metal Roofing is the local choice for metal roof installation, replacement, re-roofs, and repair on homes across Greenville, Winterville, Ayden, Grimesland, and Farmville. From the deep porches of uptown historic districts to the brick ranches of Brook Valley and the newer subdivisions near Red Banks, we match the right metal system to each roof's pitch, decking, and exposure.
Our network of licensed, bonded, and insured local contractors handles everything from standing seam and exposed-fastener panels to metal shingles and stone-coated steel. We know the region's heavy summer humidity, hurricane-season wind, and the large stock of 15 to 30 year old screw-down roofs whose fasteners are backing out. Whether you need a metal roof repair or a full replacement, you get straight guidance, not a sales pitch.
Metal roofs fail for predictable reasons, and most leaks we see start small. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once that seal fails, water slips past the screw head and tracks along purlins and decking, often showing up far from the actual entry point. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are close behind. Wind-lifted panels after a storm and punctures from fallen limbs round out the list.
Ignoring a small leak is expensive. Water that enters at a fastener or flashing can rot sheathing and framing and soak insulation before you ever see a stain inside. That is why our metal roof leak repair starts with finding the true source, not just caulking the ceiling stain. In many cases, a full screw replacement with new fasteners and sealing washers restores a watertight roof for a fraction of replacement cost.
The honest repair-versus-replace call depends on panel condition, decking integrity, and how widespread the failures are. We will tell you plainly when a repair is the right money and when a replacement makes more sense. Call (252) 351-2955 to schedule an inspection, or request a free estimate and get a clear written assessment.
We install the full range of metal systems and match each one to the home, not the other way around. Standing Seam Metal Roofing uses concealed clips and hidden fasteners for a clean, premium roof with no exposed screws to maintain. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison is simple: standing seam costs more up front but has no exposed fasteners to service, while screw-down panels cost less and need their fasteners checked and replaced over the roof's life. Where the deck is sound, Metal Roof Over Shingles (Retrofit) can be a legitimate option; when it is not, a full tear-off and Metal Roof Replacement is the right call.
Metal roof projects in Greenville are typically quoted per square foot for installations and often as flat-rate pricing for repairs. The final number depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Because those factors vary so much from home to home, we frame all figures as typical ranges only. Final pricing depends on the roof and site conditions, and we confirm it in writing after an on-site assessment.
Some carriers may offer premium discounts for metal or impact-rated roofs, though that is never a promise and depends entirely on your policy. For a clearer picture of how projects are priced, see our pricing page, then request a free estimate or free roof inspection so we can give you real numbers for your roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. What we can do is document the damage accurately so you have solid information to work with.
On permits, this is informational only. In most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Greenville building or planning department before starting your project. For questions about your roof or to schedule an inspection, contact us.
Ready to get started? Greenville Metal Roofing serves in Greenville and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Greenville · Response within 24h · No commitment · ☎ (252) 351-2955
Your Free Quote Request