Serving the Greenville area  ·  (252) 351-2955  ·  Open Mon-Sun 7am-7pm
📞 (252) 351-2955 Free Quote

Metal Roofing in Bethel, NC (27812) · Local Professionals

Greenville Metal Roofing · Fast response in Bethel and the Greenville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+170Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bethel is a small town where the wind comes across the flat fields and hits your roof square on. Most homes here are modest ranches and older farmhouses with low-pitch shingle roofs, and a good share of outbuildings and barns already wear metal. If you live near the Bethel Community Center or out on a rural route off NC-11, you know how fast a summer storm can push water under a failed fastener.

That is why homeowners in Bethel (27812) call Greenville Metal Roofing. We are based in Greenville and know the drive out to Bethel well, from the cotton fields along the way to the older homes near the center of town. We handle metal roof replacement and screw replacement and re-fastening more than anything else here, because that is what these roofs need.

Metal Roofing in Bethel (27812)

Bethel sits on flat, sandy loam ground, and that shapes how we work. Water does not run off quickly here, so we pay close attention to drainage and how the roof sheds heavy rain. Many properties have a mix of the main house and a detached garage, shed, or barn, and those outbuildings often have older corrugated panels that are due for re-fastening or replacement. Access is usually straightforward, but tight driveways and mature trees mean we plan where to stage materials and how to protect landscaping. The heat and humidity also matter: they work on sealants and fasteners over time, and we see more than a few roofs where the screws have backed out or the washers have dried up.

Our team has worked on homes and farm buildings across Bethel and the surrounding Pitt County area. We know the difference between a quick repair on a barn roof and a full replacement on a house, and we price and schedule accordingly.

Our services in Bethel

How a Job Works in Bethel

Step 1: You call us at (252) 351-2955 or request a free estimate online. We set a time to come out to your property in Bethel, walk the roof, and check the fasteners, seams, flashing, and any signs of leaks. You get a clear written estimate before any work starts.

Step 2: Once you approve, we schedule the work. For a metal roof replacement, we pull the permit with the local building department and coordinate any inspections. On older homes near the center of Bethel, we watch for decking issues under the old shingles. For screw replacement and re-fastening, we match the existing panel profile and use the right fasteners with washers so the repair lasts.

Step 3: We clean up every day and do a final walkthrough with you. We make sure nails and metal scraps are picked up, gutters are clear, and you know exactly what was done. We leave your property clean and your roof ready for the next storm.

Pricing in Bethel depends on the size and pitch of your roof, how accessible it is, the condition of the decking, and how soon you need the work done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles at $7. Metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and gutters for metal roofs at $9 per linear foot. Coating and painting start at $2.50 per square foot. These are starting figures, not final quotes. The best way to get a real number is to call us at (252) 351-2955 for a free estimate on your Bethel property.

My barn off NC-11 has old corrugated panels with screws backing out. Can you re-fasten it without replacing the whole roof?
Yes, that is one of the most common jobs we do in Bethel. If the panels are still sound and the leaks are at the fasteners, we can replace the screws and washers with the correct parts for your panel profile. We inspect for rust and panel damage first, and if a section is too far gone, we will tell you and give you options.
A storm just took off some panels on my house near Bethel. How fast can you get out?
We prioritize storm and wind damage calls in Bethel and the surrounding area. Call us at (252) 351-2955 and we will schedule an inspection as soon as possible, often the same day or next. We can tarp or secure the roof to prevent further water damage while you wait for the repair.
What does a metal roof replacement cost for a typical Bethel ranch home?
Most ranch homes in Bethel fall in the range of $9 to $12 per square foot for a replacement, depending on the panel type, roof complexity, and whether we need to repair decking. A 1,500 square foot roof might start around $13,500. We give you a firm written estimate after inspecting the roof, so you know the real number before we start.
Do I need a permit for a metal roof in Bethel, and who handles it?
A permit is typically required for a full replacement or re-roof in Bethel. Requirements and fees are set by the local building department, and we confirm the current rules before we start. We handle the permit application and inspections as part of the job, so you do not have to chase paperwork.
My neighbor says my new metal roof might drain onto their property. What are the rules?
Drainage and property line rules can be tricky. We design the roof and gutters to keep water on your property as much as possible, and we can add gutters or downspouts to direct flow. If there is a property line concern, we recommend talking with your neighbor and checking with the town. We can also coordinate with any HOA if you have one.
Are you insured for work on my Bethel property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What should I do to maintain my metal roof in Bethel between storms?
Keep gutters clear of pine needles and leaves, especially if you have loblolly pines nearby. Check for loose screws or washers after big wind, and look for any rust spots or sealant that has dried out. A quick inspection in spring and fall goes a long way. If you are not comfortable on the roof, call us for a free estimate and we will check it for you.
Why choose us?

Trusted professionals in Greenville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greenville

All your work handled by qualified professionals in Greenville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

170+ Verified Client Reviews in Greenville

⭐⭐⭐⭐⭐ 4.9/5 · 170 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greenville · Response within 24h · No commitment · ☎ (252) 351-2955

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greenville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm