Serving the Greenville area  ·  (252) 351-2955  ·  Open Mon-Sun 7am-7pm
📞 (252) 351-2955 Free Quote

Metal Roofing in Williamston, NC (27892) · Local Professionals

Greenville Metal Roofing · Fast response in Williamston and the Greenville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+170Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Williamston is a small town where the housing stock tells its age. From the historic homes near downtown to the brick ranches and farmhouses spread across Martin County, most roofs here have seen decades of humid summers and storm seasons. The flat land and sandy soil mean water drains slowly, and the mix of tall pines and oaks keeps gutters full and shingles streaked with algae.

That is why homeowners in Williamston (27892) call Greenville Metal Roofing. We know the local conditions, from the hail that hits the north side of town to the wind that peels panels off barns out on the farm roads. We are based in Greenville and serve Williamston and the surrounding areas, and we treat every roof like it is on our own street.

Metal Roofing in Williamston (27892)

Williamston sits on flat ground with sandy loam soil, which means drainage is slow and water can pool near foundations after a heavy rain. The town has a mix of older homes with steep roofs and deep porches, mid-century brick ranches with low slopes, and farm buildings with corrugated metal that has been patched over the years. The trees are a big factor: loblolly pines drop limbs and needles, live oaks and sweetgums fill gutters, and the humidity keeps algae and moss growing on shady roof planes. We see a lot of failed fasteners, separated seams, and flashing gaps around chimneys and skylights, especially after tropical storms and summer thunderstorms that bring hail.

Our team has worked on roofs across Martin County and the Greenville area, from historic homes near the Roanoke River to metal barns out on the farm roads. We know how to handle the tight lots near downtown and the wide-open spaces of the countryside. Whether it is a standing seam roof on a Queen Anne or a corrugated panel on a tobacco barn, we have the experience to do it right.

Our services in Williamston

How a Job Works in Williamston

Step 1: You call us at (252) 351-2955 or request a free estimate online. We schedule a time to come out and inspect your roof, whether it is a small repair or a full replacement. We look at the condition of the existing roof, the decking, the flashing, and the drainage, and we talk with you about what you need and what your options are. We also check for any signs of storm damage that might be covered by insurance.

Step 2: Once you approve the estimate, we pull the necessary permits from the local building department. We schedule the work and order materials. On the day of the job, our crew arrives on time and gets to work. We protect your landscaping and clean up as we go. If your home is in a historic district or HOA, we make sure the panel profile and color meet the design guidelines. For tight lots near downtown, we plan ahead for material delivery and staging so we do not block the street or your neighbor's driveway.

Step 3: When the work is done, we do a final walkthrough with you. We show you what we did, answer your questions, and make sure you are satisfied. We clean up the site completely, including magnet sweeps for nails and debris. We leave your property as clean as we found it, or better.

Pricing for metal roofing in Williamston depends on the size of your roof, the material you choose, the condition of the existing roof, and how accessible the job site is. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. Corrugated and ribbed panel roofing starts at $5.50 per square foot, metal shingles at $9, stone-coated steel at $9, and copper or specialty metal at $20. Coating and painting starts at $2.50 per square foot. Flashing, chimney, and skylight repair starts at $600, and snow guards and ice protection start at $1,200. We offer free inspections and estimates for storm damage and commercial or agricultural roofing. Call us at (252) 351-2955 to get a precise quote for your Williamston home.

My house is near downtown Williamston and has an older roof with some moss and algae. Can a metal roof help with that?
Yes. Metal roofs do not support moss and algae growth the way asphalt shingles do, and they shed water quickly. For older homes near downtown, we often recommend a standing seam or metal shingle roof that matches the historic character. We can also clean and treat the existing roof if you are not ready to replace it yet.
A storm just knocked some panels loose on my barn out on the farm road. How fast can you get out there?
We prioritize storm damage calls. Call us at (252) 351-2955 and we will schedule an inspection as soon as possible, often within a day or two. We can secure the panels temporarily if needed and give you a repair estimate. We work on farm buildings across Martin County.
What does a typical metal roof replacement cost for a 1,500 square foot ranch house in Williamston?
For a 1,500 square foot ranch with a simple gable roof, a basic corrugated panel roof might start around $8,000 to $10,000, while standing seam could run $15,000 or more. The exact price depends on the roof pitch, the number of penetrations, and whether we need to remove the old shingles. We give free estimates so you know exactly what to expect.
Do I need a permit to replace my roof in Williamston?
Yes, a permit is typically required for a full roof replacement or re-roof in Williamston. The requirements and fees are set by the local building department, and we handle the permitting process for you. We always defer to the local building department for the final say on what is required.
My neighbor's tree hangs over my property line and drops limbs on my roof. What can I do about the damage?
If a limb from a neighbor's tree falls on your roof, your insurance may cover the damage, but the neighbor is generally not responsible unless the tree was known to be diseased or dead. We can inspect and repair any damage, and we can also install snow guards or trim back overhanging branches to prevent future problems. For property line disputes, it is best to talk with your neighbor or consult a lawyer.
Are you fully insured for work on my Williamston property?
Yes, we are fully insured with general liability and workers' compensation coverage. You can have peace of mind knowing that your property and our crew are protected.
What should I do to maintain my metal roof in Williamston's humid climate?
Keep gutters and valleys clear of pine needles and leaves, especially after storms. Check for loose fasteners or lifted panels once a year, and touch up any scratches in the finish to prevent rust. We recommend a professional inspection every few years, and we offer free estimates for any maintenance or repair work.
Why choose us?

Trusted professionals in Greenville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greenville

All your work handled by qualified professionals in Greenville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

170+ Verified Client Reviews in Greenville

⭐⭐⭐⭐⭐ 4.9/5 · 170 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greenville · Response within 24h · No commitment · ☎ (252) 351-2955

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greenville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm