Serving the Greenville area  ·  (252) 351-2955  ·  Open Mon-Sun 7am-7pm
📞 (252) 351-2955 Free Quote

Metal Roofing in Grimesland, NC (27837) · Local Professionals

Greenville Metal Roofing · Fast response in Grimesland and the Greenville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+170Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Grimesland is a small river town where the Tar River bends through farm country and the housing stock tells its own story: older farmhouses with wide porches, brick ranches from the 1960s and 70s, and a growing number of homes that have already gone metal to handle the humidity and storm wind. If you live off Grimesland Bridge Road or down near the old school, you know how fast a summer thunderstorm can push limbs onto a roof.

Homeowners in Grimesland (27837) call Greenville Metal Roofing because we understand the specific mix here: metal roofs over shingle roofs on those low-pitched ranches, leak repairs on farm outbuildings, and standing seam work on newer homes that want to shed heat and debris. We are based in Greenville and serve Grimesland and the surrounding Pitt County area, and we know the difference between a river-edge property and a dry lot out on the flat farm plain.

Metal Roofing in Grimesland (27837)

Grimesland sits on the flat Tar River floodplain, and that shapes the work. The ground is sandy loam, which drains fast but can shift slightly under older structures, and many properties have mature loblolly pines and live oaks close enough to drop limbs and fill gutters. Homes near the river edge deal with heavier humidity and occasional floodwater, so we pay close attention to flashing at the eaves and around chimneys, and we often recommend a retrofit over existing shingles when the decking is still solid. Farm buildings and tobacco barns out on the flats need corrugated or ribbed panel roofs that can take a hit and keep going. On the residential side, the 1950s and 60s brick ranches with low-pitched roofs are prime candidates for a metal roof over shingles, because it adds a layer of protection without a full tear-off, and it is allowed as long as the existing shingle layers are within code limits.

Our team has worked throughout Grimesland and the Greenville area, from the older homes near the river to the newer subdivisions just outside town. We know which local building department to call for permits and how to document storm damage for insurance claims, and we never promise coverage, only a clear inspection and honest report.

Our services in Grimesland

How a Job Works in Grimesland

Step 1: You call us at (252) 351-2955 or request a free estimate online. We schedule an on-site assessment at your Grimesland property, usually within a few days. We inspect the roof, check the decking and flashing, and talk with you about what you want: a repair, a retrofit, or a full replacement. You get a written estimate with pricing starting at the figures in our services list, and we answer any questions about permits or insurance documentation.

Step 2: Once you approve, we pull the required permits from the local building department (rules vary, so we verify before we start). For a metal roof over shingles, we check that the existing layers are within code, then install the new panels with proper underlayment and fasteners. On tight lots near the river or in older neighborhoods, we plan material delivery and staging so we do not block your driveway or the street. If your home is in an HOA or historic district, we help you submit the panel profile and color for approval before ordering materials.

Step 3: We clean up every day and do a final walkthrough with you. We haul away old materials, use magnets to pick up screws and nails, and make sure your gutters and downspouts are clear. You get a walkthrough of the finished roof and our warranty information, and we do not leave until you are satisfied.

Pricing in Grimesland depends on the size of your roof, access, the condition of the decking, and how soon you need the work done. For a typical ranch home, metal roof installation starts at $8 per square foot, standing seam at $10, and a metal roof over shingles (retrofit) at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, which is often the choice for farm outbuildings and barns. Metal roof repair and leak repair start at $450, and screw replacement or re-fastening starts at $750. Flashing and chimney repair starts at $600, and gutters for metal roofs start at $9 per linear foot. We give free estimates and free inspections for storm damage, and we document everything for your insurance claim without ever promising coverage. Call (252) 351-2955 to schedule your estimate in Grimesland.

My Grimesland ranch has low-pitched shingle roofs that are starting to streak and curl. Can you install metal over them?
Yes, if the existing shingles are in decent shape and you have no more than the code-allowed number of layers. We inspect the decking first, then install underlayment and metal panels over the shingles. This retrofit is popular on the 1950s and 60s brick ranches around Grimesland because it saves on tear-off costs and adds a layer of protection against the humidity. We verify local code limits before we start.
A storm just knocked limbs onto my roof near the river in Grimesland. How fast can you respond?
We offer free storm damage inspections and prioritize active leaks and punctures. Call us at (252) 351-2955 and we will schedule an inspection as soon as possible, usually within a day or two depending on storm volume. We document the damage for your insurance claim and can perform emergency repairs to stop water intrusion.
What does a metal roof over shingles cost for a typical Grimesland home?
Retrofit over shingles starts at $7 per square foot, but the final price depends on roof size, pitch, access, and whether any decking needs repair. A typical single-story ranch might range from $7,000 to $12,000. We give a free on-site estimate so you get an accurate number for your specific property.
Do I need a permit for a metal roof in Grimesland, and how do I handle it?
Most full replacements and re-roofs require a permit, but thresholds and fees vary by jurisdiction. We verify the requirements with the local building department before starting work and handle the permit application for you. If your home is in a historic district or HOA, there may be design review for panel profile and color, and we help you prepare that submission.
My neighbor's tree hangs over my property line in Grimesland. Can I trim it before a metal roof installation?
Property line issues are civil matters, so we recommend talking with your neighbor first. In North Carolina, you generally have the right to trim branches that overhang your property, but not to damage the tree. We can advise on clearance needed for installation and schedule work around any trimming you arrange. For HOA rules, check your covenants before trimming.
Are you fully insured for work at my Grimesland property?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and your property in case of an accident during the job.
What maintenance does a metal roof need in Grimesland's humid climate?
Metal roofs are low maintenance, but in our humid summers, we recommend an annual inspection of fasteners, seals, and flashing, especially after storm season. Keep gutters clear of pine needles and leaves, and touch up any scratches to the finish. A coating every 10 to 15 years can extend the life of older panels. We offer free inspections to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Greenville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greenville

All your work handled by qualified professionals in Greenville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

170+ Verified Client Reviews in Greenville

⭐⭐⭐⭐⭐ 4.9/5 · 170 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greenville · Response within 24h · No commitment · ☎ (252) 351-2955

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greenville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm