Serving the Greenville area  ·  (252) 351-2955  ·  Open Mon-Sun 7am-7pm
📞 (252) 351-2955 Free Quote

Metal Roofing in Grifton, NC (28530) · Local Professionals

Greenville Metal Roofing · Fast response in Grifton and the Greenville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+170Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Grifton is a small river town where Contentnea Creek shapes daily life, and the housing stock shows it: older cottages and mill-era homes on raised foundations, brick ranches from the 1960s and 70s, and a growing number of newer builds on the outskirts of town near the Grifton School and the Contentnea Creek bridge.

Homeowners in ZIP 28530 call Greenville Metal Roofing because we understand how humidity, creek flooding, and pine limbs treat a roof here. We are based in Greenville, just up the road, and we have worked on enough Grifton roofs to know the difference between a shingle roof that is just tired and one that is failing because of our climate.

Metal Roofing in Grifton (28530)

Grifton sits on flat, sandy loam ground near the Contentnea Creek floodplain, and that matters for roofing. Older homes often have low-pitched roofs with minimal attic ventilation, which traps our summer humidity and accelerates shingle decay. After heavy rain, water can pool at the eaves and around chimneys, and we frequently find rot in the fascia and soffit on cottages near the creek. Pine and sweetgum limbs are a constant threat, especially on lots with mature trees, and the occasional tropical system brings wind that lifts shingles and drives rain sideways into flashing gaps. We also see a lot of metal-roofed outbuildings and barns on the farm properties around Grifton, which need different fasteners and panel profiles than a house.

Our team has worked throughout Grifton and the surrounding Pitt County area, from the streets near the Grifton Historical Museum to the newer subdivisions off Highway 11. We know which local suppliers stock the panel colors that fit the area, and we know how to schedule work around the afternoon thunderstorms that pop up in July and August.

Our services in Grifton

How a Job Works in Grifton

Step 1: You call us at (252) 351-2955 or request a free estimate online. We schedule a time to walk your roof and attic, take measurements, and check the flashing, fasteners, and decking. We will tell you honestly whether a repair makes sense or if a replacement is the better investment, and we will explain what we find in plain language.

Step 2: Once you approve the scope and price, we pull the required permits with the local building department (rules vary by jurisdiction, so we verify before we start). On tight lots near the creek or in older neighborhoods with narrow driveways, we plan material delivery and staging carefully so we do not block neighbors or damage landscaping. If your home is in a historic district or HOA, we help you submit the panel profile and color for approval before ordering materials.

Step 3: We finish by cleaning up every nail and scrap, magnet-sweeping the yard and driveway, and walking the finished roof with you. We do not leave until you are satisfied and we have shown you how the new flashing and fasteners are holding.

Pricing in Grifton depends on the size and pitch of your roof, the condition of the decking, access, and how soon you need the work done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a metal roof over existing shingles (retrofit) at $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Gutters for metal roofs start at $9 per linear foot. Storm and wind damage inspections are free. Call (252) 351-2955 for a free estimate specific to your property.

My cottage near Contentnea Creek has a low-pitched roof and gets moss every year. Will a metal roof help with that?
Yes. Metal roofs shed water faster than shingles on low slopes, and they do not hold moisture the way asphalt does, so moss and algae have a harder time taking hold. We often recommend a standing seam or ribbed panel profile with a proper underlayment for creek-side homes, and we check attic ventilation during the estimate because poor airflow is usually the root cause of the moss.
A storm just dropped a pine limb on my roof in Grifton. How fast can you get out for an inspection?
Call us at (252) 351-2955 as soon as it is safe. We prioritize storm and wind damage calls in Grifton and the surrounding area, and we offer free inspections for storm damage. We will tarp or secure an active leak if needed and give you a written scope for repair or insurance documentation.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Grifton?
For a ranch that size with a standard pitch and good access, most replacements fall in the range of $9 to $14 per square foot installed, depending on panel type, decking condition, and whether we remove the old shingles. That means roughly $13,500 to $21,000 for the roof itself, plus gutters if you need them. We give you a firm number after the free on-site estimate.
Do I need a permit to replace my roof in Grifton, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Grifton, and the threshold and inspection requirements are set by the local building department. We verify the current rules with the town before starting and pull the permit as part of the job, so you do not have to navigate that yourself.
My neighbor's oak tree hangs over my property line. Can I trim it before my roof install, and does my HOA need to approve the metal roof color?
Property line rules in North Carolina generally let you trim branches that cross onto your side, but we recommend talking with your neighbor first and checking local ordinances if the tree is significant. For HOA approval, many subdivisions around Grifton require design review for roof color and panel profile, so we help you submit the manufacturer's color sample and profile drawing before we order materials.
Are you fully insured for roofing work at my Grifton home?
Yes. We carry general liability insurance and workers' compensation coverage.
What maintenance should I do on a metal roof in Grifton between seasons?
Keep gutters clear of pine needles and sweetgum balls, especially before hurricane season in late summer. Check that no limbs are rubbing the panels after storms, and rinse off pollen and debris in the spring. We offer free inspections if you want a professional eye on the fasteners and flashing once a year, and we can replace any backed-out screws before they become leaks.
Why choose us?

Trusted professionals in Greenville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greenville

All your work handled by qualified professionals in Greenville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

170+ Verified Client Reviews in Greenville

⭐⭐⭐⭐⭐ 4.9/5 · 170 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Greenville · Response within 24h · No commitment · ☎ (252) 351-2955

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greenville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm