Serving the Greenville area  ·  (252) 351-2955  ·  Open Mon-Sun 7am-7pm
📞 (252) 351-2955 Free Quote

Metal Roofing in Wilson, NC (27893) · Local Professionals

Greenville Metal Roofing · Fast response in Wilson and the Greenville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (252) 351-2955
+170Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Wilson's historic downtown and the brick ranches off Ward Boulevard are full of roofs that have seen 50 or more summers of Carolina heat and hurricanes. From the deep porches of the 1920s bungalows near the Wilson County Courthouse to the low-slung 1960s splits in Brentwood, we know these homes and what their roofs go through.

Greenville Metal Roofing is based in Greenville and serves Wilson and the surrounding area, including ZIP 27893. When a nor'easter peels back shingles on a home off Nash Street or a thunderstorm drops a limb through a roof near Recreation Park, we're the crew homeowners call for honest, local metal roofing work.

Metal Roofing in Wilson (27893)

Wilson sits on the flat Tar River coastal plain, where sandy loam soil drains fast but summer humidity hangs heavy. The city's mix of housing stock means every job is different. Historic districts near downtown have steep-pitched roofs on Queen Anne and Colonial Revival homes, where flashing around chimneys and dormers takes patience and detail. The 1950s and 1960s brick ranches in neighborhoods like Brentwood and Forest Hills often have low-slope shingle roofs that are prime candidates for a standing seam retrofit or a metal roof over shingles. And out toward the county line, farmhouses and metal-roofed barns need repairs that hold up to wind and heat. We've worked on all of them, and we know how to match a panel profile and color to a neighborhood's character without triggering a fight with the historic district or an HOA.

Our team has been serving Wilson and the Greenville area for years, and we've seen what works here: standing seam for its clean look and wind resistance, corrugated and ribbed panels for outbuildings and agricultural buildings, and stone-coated steel when a homeowner wants the look of shingles with metal durability. We're fully insured with general liability and workers' compensation, and we pull permits through the local building department so the job is done right and inspected.

Our services in Wilson

How a Job Works in Wilson

Step 1: You call us at (252) 351-2955 or request a free estimate online. We schedule an on-site assessment at your Wilson property, usually within a few days. We look at the roof from the ground and on top, check the attic if accessible, and talk through your options, whether that's a repair, a replacement, or a metal roof over your existing shingles. You get a written estimate with clear pricing before any work starts.

Step 2: Once you approve, we handle the permit through the City of Wilson building department and schedule the work. For homes in historic districts or HOAs, we help you understand what panel profiles and colors are allowed. On tight lots in older neighborhoods, we plan material delivery and staging so we don't block driveways or damage landscaping. Most residential metal roof installations take a few days to a week, depending on the size and complexity of the roof.

Step 3: When the work is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to make sure you're satisfied. We don't leave until your property is clean and you know how to care for your new roof.

Pricing for metal roofing in Wilson depends on the size and pitch of your roof, the material you choose, and the condition of the existing roof. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. A metal roof replacement starts around $9 per square foot, and a metal roof over shingles (retrofit) starts at $7 per square foot. Repairs, including leak repair, start at $450, and screw replacement or re-fastening starts at $750. Flashing and chimney repair starts at $600. For a free estimate tailored to your Wilson home, call us at (252) 351-2955.

My 1960s brick ranch in Brentwood has a low-pitch roof. Can you install standing seam metal on it?
Yes, low-slope roofs are common in Wilson's mid-century neighborhoods, and standing seam is a great fit when installed with the right underlayment and panel profile for the pitch. We'll assess your roof's slope and condition during a free inspection and recommend the best approach, whether that's standing seam, corrugated panels, or a retrofit over your existing shingles.
A storm just took off some shingles near Recreation Park. How fast can you get out for an emergency repair?
We prioritize storm damage calls in Wilson and the surrounding area. Call us at (252) 351-2955 and we'll schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or make temporary repairs to prevent further damage, then give you a written estimate for permanent repairs.
What does a typical metal roof replacement cost for a 1,500-square-foot home in Wilson?
For a 1,500-square-foot home with a standard roof pitch, a metal roof replacement typically starts around $9 per square foot, so you're looking at roughly $13,500 and up, depending on material choice, roof complexity, and whether we're removing the old roof. Standing seam or specialty metals will be higher. Call us at (252) 351-2955 for a free estimate based on your specific roof.
Do I need a permit from the City of Wilson to replace my roof?
Yes, the City of Wilson generally requires a permit for a full roof replacement, and the requirements can vary depending on the scope of work. We handle the permitting process for you and make sure the work meets local building codes and inspection requirements. We'll also let you know if your home is in a historic district, which may have additional design review requirements.
My neighbor's tree limbs hang over my roof. What are my rights, and does my HOA need to approve a metal roof?
Property line and tree limb issues are governed by local ordinances and sometimes civil law, so we recommend checking with the City of Wilson or a legal advisor. For HOA approval, many subdivisions in Wilson require architectural review before a roof replacement. We can provide product specifications and color samples to help with your HOA application, and we'll coordinate scheduling once approval is in hand.
Are you fully insured for roofing work at my Wilson property?
Yes, Greenville Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Wilson's humid climate?
In Wilson's heat and humidity, metal roofs need occasional inspections, especially after storm season. Check for loose fasteners, debris in valleys, and any signs of flashing wear. We recommend a professional inspection every few years and after major storms. Keeping gutters clean and trimming overhanging limbs from pines and oaks will also extend the life of your roof.

Nearby service areas

📍 Greenville 27834📍 Winterville 28590📍 Ayden 28513📍 Grimesland 27837
Why choose us?

Trusted professionals in Greenville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Greenville

All your work handled by qualified professionals in Greenville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

170+ Verified Client Reviews in Greenville

⭐⭐⭐⭐⭐ 4.9/5 · 170 verified Google reviews

Mike J.
⭐⭐⭐⭐⭐
MJ
Mike J.
Ayden

“We had Greenville Metal Roofing out to put a new metal roof on our hay barn and I couldn't be happier with how it turned out. The crew of four knocked out the whole 60x40 building in two days and cleaned up every last screw off the ground. No more leaks on the equipment.”

Commercial & Agricultural Metal Roofing
Michelle B.
⭐⭐⭐⭐⭐
MB
Michelle B.
Greenville

“The copper roof over our front porch had been patching along for years, and these guys finally did it right. They replaced the failing copper panels and redid the flashing around the columns. It looks better than the day the house was built and the price was fair.”

Copper & Specialty Metal Roofing
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Winterville

“Our old farm building had shingles failing everywhere and we were worried about the cost of a full tear-off. Greenville Metal Roofing laid standing seam right over the existing roof and saved us thousands. Two months in and not a single drip.”

Metal Roof Over Shingles (Retrofit)
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Grimesland

“Got three quotes for a standing seam roof on our house and these folks were the only ones who actually got up on the roof before quoting. Took them about three days for the whole house and the seams look laser straight. Neighbors have already asked for their number.”

Standing Seam Metal Roofing
Scott H.
⭐⭐⭐⭐
SH
Scott H.
Farmville

“Had a leak around the chimney that two other roofers couldn't find. The guy from Greenville Metal Roofing traced it to bad flashing in about ten minutes and had it fixed the same afternoon. Only gripe is they were a week out before they could get to me, but worth the wait.”

Flashing, Chimney & Skylight Repair
Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Bethel

“Brand new ribbed panel roof on our house and it's night and day from the old asphalt. The crew was in and out in two days, hauled off every bit of the old material, and even blew the driveway clean. Genuinely impressed with how tidy they left everything.”

Metal Roof Installation
David L.
⭐⭐⭐⭐
DL
David L.
Fountain

“We went with stone-coated steel to keep the look of shingles but get the metal durability, and Greenville Metal Roofing nailed it. They walked us through samples without any pressure and the finished roof looks fantastic from the street. One small delay waiting on a color shipment, but they kept us posted the whole time.”

Stone-Coated Steel Roofing
James P.
⭐⭐⭐⭐⭐
JP
James P.
Grifton

“Our brick house had a rusty old metal roof that was past saving, so we had it fully replaced with new panels and fresh flashing. The difference is honestly striking, it looks like a different house. Fast, professional, and the price came in right where they quoted.”

Metal Roof Replacement
Free Quote

Get Your Free Quote

Metal Roofing in Greenville · Response within 24h · No commitment · ☎ (252) 351-2955

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Greenville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm